Question 1

What scale of games is Tiny Army Terrain compatible with?

Accepted Answer

Tiny Army Terrain is designed with a 32mm scale in mind however the terrain also is compatible with 28mm and 34mm scales.

Question 2

What settings do you recommend for printing Tiny Army Terrain?

Accepted Answer

Printing Recommendations 
- 0.2 mm layer height 
- No supports needed 
- 5 - 10% infill 
- All files can be printed on a 200mm x 200mm print plate

Question 3

Can I re-sell or share any Tiny Army Terrain product?

Accepted Answer

Unless otherwise specified, all images, artwork, and designs are the copyright of Tiny Army Terrain. Tiny Army Terrain STL files are for the use only by those purchasing the file(s) and may not be shared, added to, nor resold.

Question 4

Is there any assembly required with Tiny Army Terrain?

Accepted Answer

Yes. Some pieces of terrain need to be attached to the side of their respective building. I would recommend using sand paper and super glue to assemble the pieces together.

Question 5

What is the condition of the physical terrain?

Accepted Answer

Due to the nature of 3D printing, some of the larger terrain pieces have slight warps. Each piece is inspected and pieces with large warps are not sold. Slight warps are hardly noticable and roof pieces that are warped can be easily fixed with glue and filler. Slight warps will not affect gameplay.

FAQ

© 2023. Tiny Army Terrain. All rights reserved